|
Part # DSLTR100-DC | Condition: Brand New |
The DSL Terminator 100 high-performance Layer-3 device terminates PVC or PPP
sessions originating from a DSL CPE unit and transported via a DSLAM (DSL
Access Multiplexer). It gives service providers and carriers a cost-effective
method of aggregating and terminating high numbers of virtual circuits. The
DSL Terminator 100 also features integrated Layer-3 capabilities and
subscriber management functions that enable service providers to perform
routing, authentication, billing and service selection capabilities. It is
primarily targeted at service providers for cost-effective circuit termination
and service management but can also be used by carriers and transport
providers for circuit termination and wholesaling services.
DSL Terminator 100 — this
highly productive device of level 3, which comes out in the role of terminal
equipment for sessions PVC or PPP, which emanate from the user equipment DSL
and transferred with the aid of the multiplexer of access DSLAM (DSL Access
Multiplexer) device DSL Terminator 100 gives operators and suppliers of
services the economical method of association and end of the large number of
virtual channels. DSL Terminator 100 is supplied with the integrated functions
of level 3 and user control, which makes possible for the suppliers of
services to achieve routing and billing. The basic purpose
DSL Terminator 100 — to serve as economical terminal device and to ensure
control of services in the networks of the suppliers of services, but it can
be used also by operators and suppliers of transport services for the end of
channels and wholesale sale. None of the competing devices ensures this speed,
density and universality with so obtainable price.
Apparatus architecture on base RISC- processors ensures high capacity
and high density of sessions, necessary for the rendering of services DSL to
the constantly growing number of subscribers.
- High-speed central RISC- processor R5000 (260 mips,
200 MHz)
- To 1000 ppp or PVC simultaneously
- Capacity from 15 000 to 20 000 packets per second
- Compact construction ensures flexibility, augment ability
and reliability.
Device DSL Terminator 100 occupies one standard it cut off communication
stand, and small mass makes it possible to use it as the table equipment.
Device easily is enlarged and is tuned in accordance with an increase in the
network. Reliable construction in combination with the reserve power unit
ensures the minimum dead time of network.
- Two slots of expansion PCMCIA/PC
- One slot of expansion DRAM
- Two ports 10/100 Ethernet:
- Simple procedure of the program modernization
- Additional source of power, including direct current
- Checking safety.
The extended version of the operating system TAOS (Lucent True Access
Operating System), established more than in 60 000 concentrators of access
MAX, ensures operational simplicity DSL Terminator 100, compatibility at the
net level, wide spectrum of functions. Simplicity of control is reached by
joint functioning with solution of Lucent Navis Access.
|
Extended
OS taos includes the specially developed functions for the end of channels
DSL and control of the services of level 3 |
|
Support
of end PPP above ATM and PPP above Ethernet |
|
End of
channels PVC in accordance with RFC 1483 and RFC 1490 |
|
Bridge
routing IP |
|
Compatibility with service DSL PPP, the support of any user
DSL and concentrators DSLAM (PPP above ATM, PPP above
Ethernet) |
|
Virtual
routing ensures the high density of channels with the increased safety |
|
PAP/CHAP
and RADIUS |
Technical characteristics
| Overall dimensions (cm) |
4,5 x 43,2 x 30,5 |
| Mass (kg) |
4,6 |
| Interfaces LVS |
2 X Ethernet 10Base- T and 100Base- T |
| Physical interfaces |
DS3 and OC-3c/STM-1, DS1, T1/E1, R5-232 |
| Slots of the base device |
1 X SDRAM, 2 X PCMCIA, 2 slots of the expansion |
| Versions of the slots of the expansion |
DS3 Frame, DS3 ATM, 8 ports T1/E1 (Unchannelized),
OC-3c/STM-1 |
| Electric power supply |
Versions with the redundancy of the nourishment of
alternating and direct current |
| Parameters of the electric power supply |
80 W, 47-63 Hz, 90-240 v of alternating current, 270 Bte/chas |
| Productivity of the processor |
15 000 |
Characteristics of software
| End PPP |
PPP above ATM, PPP above Ethernet |
| End PVC |
RFC 1483 (MPOA), RFC 1490 (MPOFR) |
| Protocols of routing IP |
RIP, RIP2, OSPF, Bridged IP Routing |
| Protocols of the tunneling |
L2TP, PPTP, ATMP |
| Safety |
RADIUS, Extended RADIUS, PAP (Password Authentication
Protocol), CHAP (Challenge Authentication Protocol), access along the
assigned profile |
| Support to the virtual routing |
Safe logical separation (Secure logical partitioning)
table of the routing |
| Support Plug-And-Play |
Functions Plug-And-Play on base DCHP/TFTP, control
SNMP, Navis Access |
| Operating system |
TAOS (True Access Operation System) |
|
This product is Brand New and comes with the following warranty:
• This product comes with a 90 day warranty.
|
|
|
|
 |
Sign up for the BuyMeBuyMe.com eMail newsletter. Here you will get access to exclusive promotions and the newest products and price drops available!
Sign up now!
|
|
|
A VeriSign Company
|
|
